Three custom-made dark gray leader heads ready to install for a Los Angeles home – SoCal Rain Gutters

Made for your home

Custom Leader Heads in Los Angeles

We custom-make leader heads for each home, in aluminum painted to match or in copper. Each one is sized to your roof and the downspout below.

Free estimates · Monday–Friday, 7 AM–5 PM. Saturdays by appointment.

What it is

What are custom leader heads?

A leader head is the box at the top of a downspout. It catches water from a flat roof’s scupper or a gutter outlet and feeds it into the downspout, so the water goes down the pipe instead of spilling over.

We don’t buy leader heads off a shelf. We custom-make each one in our own shop, for the home it goes on. Aluminum leader heads are painted to match your gutters and downspouts. Copper ones are left bare to weather with your copper.

Best for

Who custom leader heads are best for

  • Flat and low-slope roofs. Roofs that drain through scuppers in a parapet wall need them.
  • Spanish-style and stucco homes. Where a leader head is part of the look.
  • Copper systems. A custom copper leader head finishes copper gutters and downspouts.
  • Old, rusted leader heads. Replace them with new ones made to fit.

Why ours last

Why our leader heads last longer

A leader head takes a lot of water at once. It has to fit the roof and the downspout exactly.

Made for your house

We custom-make every leader head for the home it goes on, sized to the scupper or gutter outlet above and the downspout below.

Aluminum or copper

Aluminum leader heads are painted to match your gutters and downspouts. Copper ones are left bare and weather along with your copper gutters.

Gutters are all we do

We’re gutter specialists, not general contractors. We’ve installed, repaired and cleaned gutters around Los Angeles since 2011. It’s the only work we take on.

Our own sheet metal work

We fabricate leader heads ourselves, along with box gutters, flashing, custom corners and odd sizes. Nothing is pulled off a shelf.

Sizes, materials and colors

Custom leader heads: sizes, materials and colors

Made to fit

Custom-made in our own shop for each home, sized to the scupper or outlet and the downspout.

Aluminum

Painted to match your gutters and downspouts, from our 20 colors.

Copper

Left bare, to weather with your copper gutters and downspouts.

Repair or replace

Leaky leader heads repaired when they can be saved, replaced when they can’t.

Warranty

12 months on craftsmanship and material.

Our 20 colors

One color palette covers both gutters and downspouts, so the whole system matches. Choose from these 20 colors.

  • High Gloss White
  • Lo Gloss White
  • Light Pecan
  • Cream
  • Ivory
  • Wicker
  • Clay
  • Buckskin Brown
  • Terratone
  • Colonial Gray
  • Dark Gray
  • Tuxedo Gray
  • Weathered Bronze
  • Black
  • Royal Brown
  • Musket Brown
  • Harvest Brown
  • Red
  • Green
  • Blue

Colors shown are approximate. Copper is not painted and isn’t part of the color chart.

How it works

How we install custom leader heads

Here’s what to expect, start to finish. Most installs are done in one day.

  1. Free estimate

    We come out, look at the roof edge and measure. You get a price before any work starts. The estimate is free.

  2. Pick the shape and finish

    Choose the style, and aluminum painted to match or bare copper.

  3. We make your leader heads

    We custom-make each leader head to fit the scupper or outlet and the downspout below.

  4. Old pieces come down

    If there are old leader heads or downspouts, we take them down and haul them away.

  5. Installed and connected

    We set the leader head, connect the downspout and seal the joints.

  6. Water test and cleanup

    We run water through to check it drains, then clean up.

Signs

Signs it’s time to replace them

  • Rust or holes in the leader head box
  • Water spilling over the top in a heavy rain
  • Leaks where the leader head meets the downspout
  • Water stains on the wall below it

Leaky leader heads can sometimes be repaired. We’ll tell you which way makes sense.

FAQ

Custom leader heads questions

Do you make leader heads yourselves?

Yes. We custom-make every leader head in our own shop, for the home it goes on.

What materials do you use?

Aluminum, painted to match your gutters and downspouts, or copper, left bare.

Does my house need leader heads?

Homes with flat or low-slope roofs that drain through scuppers usually do. We’ll tell you when we look at the roof.

Can you repair an old leader head?

Yes, when it can be saved; otherwise we make a new one. See gutter repair.

How much do custom leader heads cost?

It depends on the house: how many you need, the size and shape, aluminum or copper, and how easy they are to reach. Estimates are free, and you get a price before any work starts. Book a free estimate.

How do I book an estimate?

Book a free estimate online on our Contact page: pick the service, enter your ZIP and choose a time. Or call or text (310) 533-7730. Monday–Friday, 7 AM–5 PM. Saturdays by appointment.

Licensed, Insured & BondedCA License #1144568

Operating since 2011Southern California

Get a quote

Schedule your estimate for custom leader heads

Estimates are free. Pick a time online, or call or text (310) 533-7730.

Monday–Friday, 7 AM–5 PM. Saturdays by appointment.

Request service

Book free estimate Call Text