
Gutters
Fascia Gutters in Los Angeles
A gutter with a tall, flat face that sits flush along the roof edge. It looks less like a gutter and more like part of the house.
Free estimates · Monday–Friday, 7 AM–5 PM. Saturdays by appointment.
What it is
What are fascia gutters?
A fascia gutter has a flat front and mounts flush along the fascia board. Instead of hanging off the edge, it reads as a clean band of trim.
It’s a good choice for homes with simple, flat lines. We form each run at your house from one continuous roll, so the long flat face has no seams along the way.
Best for
Who fascia gutters are best for
- Modern and flat-roof homes. The flat face matches clean, simple trim.
- A built-in look. The gutter disappears into the lines of the house.
- Long, straight roof edges. One seamless run looks best on a long flat face.
- Square downspouts. Pairs well with box square downspouts.
Why ours last
Why our gutters last longer
Most gutter leaks start where two pieces meet. So we build gutters with as few joints as possible.
Formed at your house
We bring our gutter machine to your home. Each gutter comes off one continuous roll of metal and is cut to the exact length of your roof edge. No seams along the runs means nothing there to pull apart or leak.
Corners fitted on site
Pre-made gutters come in short sections, joined with factory corner pieces (pre-made miters). Every joint and every corner is a spot that can leak and wear out. We fit each corner to your house, on site, so it sits tight.
Gutters are all we do
We’re gutter specialists, not general contractors. We’ve installed, repaired and cleaned gutters around Los Angeles since 2011. It’s the only work we take on.
We do our own sheet metal work
We fabricate our own custom leader heads, box gutters, flashing, custom corners and odd sizes. If your house needs a piece nobody sells, we make it.
Sizes, materials and colors
Fascia gutters: sizes, materials and colors
Sizes
We install 5-inch and 6-inch gutters. We measure your roof and recommend the size that handles its water.
Material
Aluminum, formed at your house from one continuous roll. Prefer copper? See copper gutters.
Colors
20 colors, with downspouts to match. See the chart below.
Installation
Most installs are done in one day, old gutters hauled away.
Corners
Fitted on site to your roof line, not factory corner pieces.
Warranty
12 months on craftsmanship and material.
Our 20 colors
One color palette covers both gutters and downspouts, so the whole system matches. Choose from these 20 colors.
- High Gloss White
- Lo Gloss White
- Light Pecan
- Cream
- Ivory
- Wicker
- Clay
- Buckskin Brown
- Terratone
- Colonial Gray
- Dark Gray
- Tuxedo Gray
- Weathered Bronze
- Black
- Royal Brown
- Musket Brown
- Harvest Brown
- Red
- Green
- Blue
Colors shown are approximate. Copper is not painted and isn’t part of the color chart.
How it works
How we install fascia gutters
Here’s what to expect, start to finish. Most installs are done in one day.
Free estimate
We come out, look at the roof edge and measure. You get a price before any work starts. The estimate is free.
Pick your style and color
Choose the size of your fascia gutters (5" or 6") and one of our 20 colors. We’ll show you what suits the house.
Old gutters come down
We take the old gutters down and haul them away. Nothing is left in your yard.
We form the gutters on site
Each run is formed from one continuous roll of metal and cut to length, right at your house.
Hangers, downspouts, leader heads
We install the hangers, fit the corners, and put up the downspouts and leader heads, pitched so water runs to the outlets.
Water test and cleanup
We run water through the system to check that it drains, clean up, and show you before-and-after photos.
Signs
Signs it’s time to replace them
- Water spills over the edge when it rains
- Rust, holes or open seams in more than one spot
- Runs sag or pull away from the roof edge, even after repairs
- Gutters overflow in a normal rain, so they may be too small for the roof
- Peeling paint, stains or rot on the fascia board behind the gutter
- No gutters at all, and water digs into the beds or pools at the foundation
Only seeing one of these? It may just need a repair.
FAQ
Fascia gutters questions
What is a fascia gutter?
A gutter with a flat face that mounts flush along the fascia board, so the roof edge looks clean and built-in.
Are your fascia gutters seamless?
Yes. Each run is formed at your house from one continuous roll, with corners fitted on site.
What size gutters do I need?
Most homes use 5-inch or 6-inch gutters. Bigger or steeper roofs send more water to the edge, so they often need 6-inch. We measure and recommend a size at the free estimate.
How long does installation take?
Most installs are done in one day. Very long runs, tall walls or custom pieces can take a little longer, and we’ll tell you up front.
How much do fascia gutters cost?
It depends on the house: how many feet you need, how many stories the house is, and how many corners and downspouts. Estimates are free, and you get a price before any work starts. Book a free estimate.
How do I book an estimate?
Book a free estimate online on our Contact page: pick the service, enter your ZIP and choose a time. Or call or text (310) 533-7730. Monday–Friday, 7 AM–5 PM. Saturdays by appointment.
Service areas
Areas we serve
25 neighborhoods and cities across Los Angeles. Pick yours to see what we do there.
- Santa Monica
- Venice
- Brentwood
- Pacific Palisades
- Beverly Hills
- Culver City
- Marina del Rey
- Playa del Rey & Westchester
- West LA & Westwood
- Topanga
- Mar Vista
- Sawtelle
- Malibu
- West Hollywood
- Century City
- Bel Air
- Mid City
- Hollywood
- Studio City & Sherman Oaks
- El Segundo
- Inglewood
- Manhattan Beach
- South Pasadena
- Pasadena
- Los Angeles
Licensed, Insured & BondedCA License #1144568
Operating since 2011Southern California
Get a quote
Schedule your estimate for fascia gutters
Estimates are free. Pick a time online, or call or text (310) 533-7730.
Monday–Friday, 7 AM–5 PM. Saturdays by appointment.
Book a free estimate
Pick a time that works and we come out to look at the job. Estimates are free.
Pick a time for your free estimate:
Your free estimate visit


